View MN101D06F_11777.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MN101D06F , MN101D06G , MN101D06H
Type ROM (x 8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time Interrupts
With main clock operated When sub-clock operated MN101D06F 96 K 3K MN101D06G 128 K 4K QFP100-P-1818B
*Lead-free
MN101D06H 160 K 5K
0.1397 s (at 4.0 V to 5.5 V, 14.32 MHz) 71.5 s (at 3.0 V to 5.5 V fixed to 14.32 MHz internal frequency division) 61 s (at 2.2 V to 5.5 V, 32.768 kHz)
* RESET * Runaway * External 0 * External 1 * External 2 * External 3 * External 4 * key input (P50 to 54) * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 4 * Timer 6 * Capstan FG * Control * HSW * Cylinder(Drum) FG * Servo V-sync * Synchronous output * OSD * XDS * Serial 0 * Serial 1 * Serial 2 * A/D (common with PWM 4 reference frequency) * OSD V-sync Timer counter 0: 16-bit x 1 (timer function, clock function [max. 2 s or max. 36 h at cascade-connecting with timer 6]) Clock source ********************* 1/2, (1/4,) 1/8, (1/16) of system clock frequency; overflow of timer counter 6; 1/512 of XI oscillation clock or OSC oscillation clock frequency Interrupt source **************** overflow of timer counter 0 Timer counter 1: 16-bit x 1 (timer function, linear timer counter function) Clock source ********************* 1/2, (1/4,) 1/8, (1/16) of system clock frequency; CTL signal Interrupt source **************** overflow of timer counter 1 Timer counter 2: 16-bit x 1 (timer function, input capture, duty judgment of CTL signal(VISS/VASS detection function)) Clock source ********************* 1/2, (1/4,) 1/8, (1/16,) 1/12, (1/24) of system clock frequency Interrupt source **************** overflow of timer counter 2; input of CTL specified edge; underflow of timer 2 shift register 4-bit counter; coincidence of timer 2 shift register with timer 2 shift register compare register Timer counter 3: 16-bit x 1 (timer function, detection of serial indexing, generation of remote control output carrier frequency) Clock source ********************* 1/2, (1/4,) 1/8, (1/16) of system clock frequency; XI oscillation clock Interrupt source **************** overflow of timer counter 3 Timer counter 4: 16-bit x 1 (timer function, event count [P15 input], generation of serial transmission clock) Clock source ********************* 1/8, (1/16) of system clock frequency; external clock input Interrupt source **************** overflow of timer counter 4; coincidence of timer counter 4 with OCR4 Timer counter 5: 19-bit x 1 (watchdog, stable oscillation waiting function) Clock source ********************* system clock Watchdog interrupt source ** 1/216, 1/219 of timer counter 5 frequency Clear by stable oscillation ** after 256 counts by timer counter 5 (2 18 counts of OSC oscillation clock) Timer counter 6: 16-bit x 1 (clock function [max. 2 s]) Clock source ********************* 1/512 of OSC oscillation clock frequency; XI oscillation clock; 1/4, (1/8,) 1/64, (1/128) of system clock frequency Interrupt source **************** 1/213, 1/214, 1/215 overflow of timer counter 6 Timer counter 7: 8-bit x 1 or 4-bit x 2 (timer function, event count) Clock source ********************* 1/4, (1/8,) 1/16, (1/32) of system clock frequency; external clock input Interrupt source **************** overflow of timer counter 7 (although when 4-bit x 2, there is one interrupt vector. )
Timer Counter
Serial Interface
Serial 0: 8-bit x 1 (synchronous type/start-stop synchronous type) (transfer direction of MSB/LSB selectable) Synchronous type clock source 1/8, 1/16, 1/32, 1/64, 1/128, 1/256 of system clock frequency; 2-division timer 4 output; NSBT0 pin input Clock for UART ************** 8-division of above clock; 2-division timer 4 output; NSBT0 pin input
MAD00029FEM
MN101D06F,MN101D06G,MN101D06H
Serial Interface (Continue)
Serial 1: 8-bit x 1 (synchronous type/remote control transmission/simple remote control receive) (transfer direction of MSB/LSB selectable, start condition function) Clock source ********************* 1/8, 1/16, 1/32, 1/64, 1/128, 1/256 of system clock frequency; 2-division timer 4 output; NSBT1 pin input Remote control clock ****** 2-division timer 4 output Serial 2: 8-bit x 1 (I2C) (master transmission/reception, slave transmission/reception) Clock source ********************* 1/144 to 1/252 of system clock; SCK pin input
OSD
OSD mode: Accommodation with menu(internal synchronous) or super impose(external synchronous) display Applicable broadcasting system:NTSC, PAL, PAL-M, PAL-N Screen configuration : 24 characters x 2n rows (n = 1 to 6) Character type : max. 512 character types (variable, incude special characters) Character size : 12 x 18 dots (Vertical direction: 1 dot for 2H at not enlargement) Enlarged characters : each x 2, x 3 or x 4 settings in horizontal and vertical Character interpolation : none Line background color : 8-hue settable (settable in the row unit at menu display) Line background intensity : 8 gradations settable in the row unit (at output of composite video signal) Screen background color : 8-hue settable (at output of composite video signal) Character color : white (at output of composite video signal) Character intensity : 8 gradations settable in the row unit (at output of composite video signal) Frame function : 1-dot frame in 4 or 8 directions Frame intensity : 4 gradations settable in the row unit (at output of composite video signal) Box shade function : settable in the character unit (at output of composite video signal with 129 or more characters (character types)) Blinking : none (covered by software) Inverted character : settable in the character unit Halftone : settable in the row unit in 2 intensity gradations (at output of external synchronous composite video signal) CCD mode: Supports Closed Caption in the U.S.A. Screen configuration : 32 characters x 16 rows Character type : max. 128 character types (variable) Character size : 12 x 26 dots (Vertical direction: 1 dot for 1H, including 8 dots in the underlined area) Enlarged characters : none Character interpolation : none Line background color : 8-hue settable Line background intensity : 8 gradations settable in the screen unit (at output of composite video signal) Screen background color : 8-hue settable (at output of composite video signal) Character color : 8 colors (at RGB output) : White (at output of composite video signal) Character intensity : 8 gradations settable in the screen unit (at output of composite video signal) Frame function : none Box shade function : none Inverted character : none Halftone : settable in the row unit in 2 intensity gradations (at output of external synchronous composite video signal) Others : Underline, italic, blinking function and scroll Input : composite video signal input (output level: 1 V[p-p] / 2 V[p-p]) Clamp method : sync tip clamp, clamp level in 4 levels Output : composite video output : digital output (6 pins) Measure against image fluctuation : built-in AFC circuit Dot clock : 1/2 of OSC oscillation clock (automatic phase adjustment)
See the next page for electrical characteristics, pin assignment and support tool.
MAD00029FEM
XDS ROM Correction I/O Pins A/D Inputs PWM I/O Input
Built-in U.S. closed caption data slicer (optional 2 line data can be extracted.) Correcting address designation: up to 3 addresses possible Correction method: correction program being saved in internal RAM 75 2 * Common use: 66 * Common use: 2
8-bit x 13-ch. (without S/H) 13-bit x 2-ch. (at repetition cycle 572 s at 14.32 MHz), 10-bit x 2-ch. (at repetition cycle 71.5 s at 14.32 MHz), 8-bit x 1-ch. (at repetition cycle 71.5 s, 0.572 ms, 1.14 ms, 2.29 ms at 14.32 MHz) 18-bit x 6-ch. 16-bit x 2 (8-bit synchronous output; 4-bit 3-state synchronous output), 16-bit x 1 (weak electric field V-sync backup), 16-bit x 1 (Rec CTL) Buzzer output; 3-state output VLP pin; remote control receive; CTL signal input terminal; Capstan FG inputterminal; Sylinder(Durm) PG/FG input terminals; HSW output terminal; Head Amp/Rortary control output terminals; output of 1/2 OSC oscillation clock (2 V[p-p]); output of 1/4 OSC oscillation clock (1 V[p-p])
ICR OCR Special Ports
Electrical Characteristics
Supply current
Limit Parameter Symbol IDD1 IDD2 Operating supply current Stop of 14.32 MHz oscillation, VDD = 2.7 V IDD3 32 kHz oscillation operation without load Supply current at STOP IDSP IDHT0 Supply current at HALT IDHT1 32 kHz oscillation operation without load Stop of oscillation without load, VDD = 5 V, Ta = 55 C 14.32 MHz oscillation without load, VDD = 5 V Stop of 14.32 MHz oscillation, VDD = 2.7 V 5 20 5 10 15 A mA A 50 100 A Condition min 14.32 MHz operation without load, VDD = 5 V 1/1024 of 14.32 MHz operation without load, VDD = 3.0 V typ 60 2 max 100 5 mA mA Unit
(Ta = 25 C 2 C , VSS = 0 V)
A/D Converter Performance
Limit Parameter Conversion relative error A/D Conversion Time Analog Input Voltage Symbol NLAD tAD fosc = 14.32 MHz 8 5 Condition min typ max 3 LSB s V Unit
(Ta = 25 C 2 C , VDD = 5.0 V , VSS = 0 V)
MAD00029FEM
MN101D06F , MN101D06G , MN101D06H
Pin Assignment
RCTLN RCTLP AVDD CTLA AVSS VRI VRO AFG FGF YPG(P91) YFG(PFG) PGMM(P92) VOW1(PA0) VOW2(PA1) VOW3(PA2) VOW4(PA3) VOB1(PA4) VOB2(PA5) PA6 SECAM(PA7) FSCLPF(PB0) FSCI(PB1) AFCLPF(PB2) AFCC(PB3) VDD2 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51
Support Tool
In-circuit Emulator Flash Memory Built-in Type
PX-ICE101C / D + PX-PRB101D06-QFP100-P-1818B-M Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101DF06ZAF 224 K 6K 0.1397 s (at 4.0 V to 5.5 V, 14.32 MHz) 71.5 s (at 3.0 V to 5.5 V, fixed to 14.32 MHz internal division) 61 s (at 2.5 V to 5.5 V, 32.768 kHz) Package QFP100-P-1818B *Lead-free
MAD00029FEM
IRQ0(P64) IRQ1(P63) IRQ2(P62) IRQ3(P61) IRQ4(P60) KEYIRQ4(P54) KEYIRQ3(P53) KEYIRQ2(P52) KEYIRQ1(P51) KEYIRQ0(P50) NSBT1(P07) NSBI1(P06) NSBO1(P05) NSBT0(P02) NSBI0(P01) NSBO0(P00) SDA(P27) SCK(P26) HBUFD6/BUZZER(P46) HBUFD4(P44) HBUFD2/DAOUT(P42) HBUFD0(P40) HSW VLP NRST(P04)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
CO TPZ(P90/AD12) AD11(PC3) AD10(PC2) AD9(PC1) AD8(PC0) AD7(P87) AD6(P86) AD5(P85) AD4(P84) AD3(P83) AD2(P82) AD1(P81) AD0(P80) P77 P76 P75 P74 P73 P72 P71 P70 ROTA(P67) HAMP(P66) DENV(P65)
76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
MN101D06F MN101D06G MN101D06H
50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26
CVIN2(PB4) CVIN(PB5) VSS2 CVOUT(PB6) HSYNC(PB7) VSYN(P20) OSCO2(P21) OSCI2(P22) SXI XO(P23) XI(P24) VSS OSCI OSCO VDD SBUFD0(P25/PWM4) PWM0 PWM1 SBUFD1(P11/PWM2) SBUFD2(P12/PWM3) SBUFD3(P13/FF15) SBUFD4(P14/TC3O) SBUFD5(P15/TC4I) SBUFD6(OSDH/P16/XDSCK) SBUFD7(OSDV/P17/OSCDIV/XDSDAT)
QFP100-P-1818B *Lead-free
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technical information described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical information as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.
2003 SEP

▲Up To Search▲

Price & Availability of MN101D06F

	To Download MN101D06F Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .